High Speed Computerized Laminating Machine Cutting Compound Machine
A multifunctional laminating waste discharging machine, multilayer
material jointing waste, can be applied to the mobile phone,
computer, liquid crystal displays and other electronic label
industry adhesive tape adhesive composite equipment products.
Reeling waste magnetic powder tension control is adopted. A
composite single, double-sided adhesive with bottom paper function.
At the same time can be more complex and has a local joint
Servicing and notes for attention
1. Please use voltage of 220V properly. Tolerance of input voltage
shall be ＋/-20V and the machine shall be grounded properly to
prevent from injury as a result of electricity leakage.
2. Be sure to turn off the power and take off the plug before the
machine is adjusted to ensure safety. Keep children and people
other than operators away to prevent from any danger.
3. There shall not be any water being injected out when an air gun
is used to clean dust in the electrical box. In this case, please
discharge water out of the air compressor.
4. Placement of the machine: Wall surface of rear rack of the
machine shall be over 500mm away from the wall, and there shall be
a maintenance space reserved at two sides.
Main Technical Parameters
|Max Feeding Width||210||300||350|
|Max Rewinding Diameter||400mm||400mm||400mm|
|Max Winding Diameter||500mm||500mm||500mm|
|Main Engineer Power||0.4KW||0.4KW||0.75KW|
|Power Supply||220V 50HZ||220V 50HZ||220V 50HZ|