KL-350 Four Station Aluminium Foil Laminating Machine
Main Technical Parameters:
|Maximum discharge width||350|
|Maximum discharge diameter||400mm|
|Maximum winding diameter||550mm|
|Power Supply||220V 50 HZ|
Multi-layer Laminating machine is widely used in electric product
It can be use to remove die cut wastage. Also can be used for
rewind protective film.
If needed, we can add kiss slit blade on the machine, to get finger
Some customers use the machine for change release liner.
1) The laminating part is whole casting, makes sure the high
2) Magnetic brake and clutch are used for control the unwind rewind
3) The position of the shafts are adjustable.
4) Machine is with moving wheels. Easier for remove.
Servicing and notes for attention
1.There shall not be any water being injected out when an air gun
is used to clean dust in the electrical box. In this case, please
discharge water out of the air compressor.
2.Technical support : Professional engineers team to help you
design a whole-set product line to
get highest profit with lowest cost and offer you technical support
3. Be sure to turn off the power and take off the plug before the
machine is adjusted to ensure safety. Keep children and people
other than operators away to prevent from any danger.
4.Please use voltage of 220V properly. Tolerance of input voltage
shall be ＋/-20V and the machine shall be grounded properly to
prevent from injury as a result of electricity leakage.
North America,South America,Western Europe,Eastern Europe,Eastern
As,North America,North America, South America ,Western
Europe,Eastern Europe,Eastern Asia,Southeast Asia,Middle East
Main Technical Parameters of other type:
|Max Feeding Width||210||300||350|
|Max Rewinding Diameter||400mm||400mm||400mm|
|Max Winding Diameter||500mm||500mm|
|Power supply||220V 50HZ||220V 50HZ||220V 50HZ|
Guangdong Kunlun Electronic Equipment Technology Co., Ltd.
We are a professional machine manufacturer with 10 years
experiences in China. we would like to be your honest supplier in
There are all kinds of machines in the exhibition room, so
customers don't need to go to the work shop to see the machine. We
Can provide for the customer free proofing.