Controlled by Electromagnetic POS Paper Roll Slitting Machinery
The equipment is applicable for wide dividing and cutting, which
has the advantages of setting length by automatic metering,
automatic stop, adjustment control by hydraulic pressure for
unreeling, stepless timing by frequency conversion, magnetic powder
clutch, brake controlled and lead by constant torque tension,
waste-disposal device, double shaft reeling, feeding with
air-driven lock, fast assembling and disassembling. The equipment
is one of the necessary support equipment for label printing
machine for its high precision, high speed and easy operation.
(1) One slitting station
(2) One laminating station
(3) With one unwinding shaft, 2 pieces rewinding shafts
(4) With meter/number counter
(5) With two photoelectric eyes
(6) With 10 pieces round slitting knives
(7) Machine has blower fan to blow away the trimmed edge
The machine is suitable for cutting industrial tape, photoelectric
material, glass paper tape, protective film, copper foil, OPP, PP,
PE, PVC, paper, fabrics processing.
(1) Machine speed are controlled by electromagnetic.
(2) Separate control system, easy to operation.
(3) Adopt automatic correction system in unwinding part, in order
to slit and rewind accurately.
(4) Photocell eye is good for tracking the edge of material and
(5) Adopts pneumatic shaft and magnetic powder brake for rewinding
(6) Automatic meter counter.
(7) Independent fan waste discharge.
Packaging and Delivery
slitting and rewinding machine can be packed in wooden case or in
the container or
w wthin 30 days after receive deposit
Main Technical Parameters
Max feeding width(mm) :1300mm
Unwinding diameter (mm) :800
Rewinding diameter (mm) :450
Speed (m/min) : 80
Dimension (mm) :2400*2000*1300
Main engineer power :6kw
Voltage :380v 50HZ
Min slitting width (mm) :15
Max feeding width(mm)
Unwinding diameter (mm)
Rewinding diameter (mm)
Main engineer power
Min slitting width (mm)
Structure and working principle
The machine is composed of a feeding unit, an automatic pneumatic
and hydraulic deviation correction unit, a transmission unit, a
dragging and laminating unit, a splitting unit, a winding unit, a
waste discharge unit, a tension control unit and an electrical
controller and so on.
Structure and physical map as reference